Machinoid Private Limited

Main Features:

 

1. 5W Ultra-fine Laser: iCube Pro uses the 5W diode laser with 0.06mm ultra fine laser focus. It has strong cutting penetration and engraving precision, which can cut up to 10mm soft board, 6mm Acrylic, and engrave ceramic, stainless steel.

2. High-Speed Engraving: iCube Pro 5W laser engraver with the 32-bit motherboard greatly improves the engraving efficiency, which can reach 10000mm/min engraving speed.

3. With Smoke Filter: Sculpfun iCube laser engraver is equipped with the smoke filtration system that effectively filters the smoke generated during the engraving and cutting process without the enclosure, which makes it more convenient to engrave and cut in an office or home. Bringing more usage scenarios and enjoying the fun of engraving without limitation.

4. Multiple Connection Methods: The laser engraving machine supports mobile phone and computer system connection. You can connect to iCube machine via your mobile phone with Sculpfun APP, or you can connect to the computer with Type-C interface data cable to use. It is compatible with Win7/Win8/Win10/Win11/MAC/IOS/Android/Linux system.

5. Temperature Alarm Function: Built with the temperature alarm device, the machine will stop running and emit a buzzer alarm when the temperature inside the engraving machine is over 45℃ to ensure the safety of users and equipment. And when the temperature descends, restart the machine to start the work.

6. Enclosed Eye Protection Shield: iCube portable laser engraver is designed with a detachable fully enclosed Acrylic material eye protection shield, which can effectively protect your eyes from different angles. It enables you to observe the laser engraving process without wearing the goggles.

7. Engraving Objects without Size Limit: With the unique semi-open structure design, there is no limitation by the size of the engraving objects. You can place them inside the machine or put the machine on the surface of some large objects to perform the tasks. The patterns engraving area is 125x125mm which can meet your various engraving demands.

8. Replaceable Laser Lens: Sculpfun iCube series adopts an innovative laser head that supports to replace the laser lens, which greatly improves the service life of the laser by more than 10 times longer than that of other general lasers. When the lens is damaged or dirtied after long-term use, it can be replaced to restore the cutting power.

Packing List:

1 x Laser Engraver; 1 x U-Shaped Shield; 1 x Metal Plate; 1 x Laser Head ;1 x Power Adapter; 1 x Power Cable; 1 x Type-C Data Cable; 1 x Cotton Filter Set; 1 x Lens Repair Kit; 1 x Goggle; 1 x Basswood Board; 1 x MDF; 1 x Installation Instruction

Main Features:

 

1. 3W Ultra-fine Laser: iCube uses the 3W diode laser with 0.02mm ultra fine laser focus. It has super fine engraving ability which can present high definition engraving image. This laser engraver is suitable for engraving detailed objects and can cut colored paper and create three-dimensional paper works.

2. High-Speed Engraving: iCube 3W laser engraver with the 32-bit motherboard greatly improves the engraving efficiency, which can reach 10000mm/min engraving speed.

3. With Smoke Filter: Sculpfun iCube laser engraver is equipped with the smoke filtration system that effectively filters the smoke generated during the engraving and cutting process without the enclosure, which makes it more convenient to engrave and cut in an office or home. Bringing more usage scenarios and enjoying the fun of engraving without limitation.

Multiple Connection Methods: The laser engraving machine supports mobile phone and computer system connection. You can connect to iCube machine via your mobile phone with Sculpfun APP, or you can connect to the computer with Type-C interface data cable to use. It is compatible with Win7/Win8/Win10/Win11/MAC/IOS/Android/Linux system.

4. Temperature Alarm Function: Built with the temperature alarm device, the machine will stop running and emit a buzzer alarm when the temperature inside the engraving machine is over 45℃ to ensure the safety of users and equipment. And when the temperature descends, restart the machine to start the work.

5. Enclosed Eye Protection Shield: iCube portable laser engraver is designed with a detachable fully enclosed Acrylic material eye protection shield, which can effectively protect your eyes from different angles. It enables you to observe the laser engraving process without wearing the goggles.

6. Engraving Objects without Size Limit: With the unique semi-open structure design, there is no limitation by the size of the engraving objects. You can place them inside the machine or put the machine on the surface of some large objects to perform the tasks. The patterns engraving area is 125x125mm which can meet your various engraving demands.

7. Replaceable Laser Lens: Sculpfun iCube series adopts an innovative laser head that supports to replace the laser lens, which greatly improves the service life of the laser by more than 10 times longer than that of other general lasers. When the lens is damaged or dirtied after long-term use, it can be replaced to restore the cutting power.

The Sculpfun S10 10W Laser Engraving Machine is a high-performance laser engraver and cutter designed for precise engraving and cutting on various materials, including wood, acrylic, leather, metal, and more. With its 10W laser power, it provides enhanced cutting capabilities, especially for thicker materials, and offers detailed engraving results.

1.40W Powerful Laser: Sculpfun SF-A9 adopts the 40W laser head with a strong cutting ability, and supports the 40W/20W laser power switching, which can cut 20mm plywood and 6mm dark acrylic at one pass time. It uses the heat pipe radiator to provide a faster and more balanced heat dissipation performance.

2. Safety Protection Design: Built with a tilt sensor, it will set off an alarm and stop emitting the laser light while the machine body is off-balance and tilts over 15°. It is also equipped with the functions of emergency stop and child safety lock switches, flame and temperature sensors. When it detects the flames during the working process, the flame and temperature sensors will be triggered and the machine will stop working with an alarm while automatically moves to the safest location.

3. High Speed Up to 36000mm/min: The SF-A9 laser engraving machine supports the high speed engraving mode with a faster working speed of up to 36000mm/min as well as a stable machine body to bring a perfect engraving effect. And it supports precision mode to cut more accurately for a better components assembly.

4. Precise Focusing Design: Designed with a most precise focusing, the focus lever on the laser head is stable that enables the focusing position more accurate. The red knob on the right side of the laser is to raise or lower the laser module for the quick height positioning according to the material’s thickness, and the knob on the top of the laser is for the precise adjustment.

5. Sturdy and Easy Installation: Full metal structure design makes the machine robust. The levelling structure of the metal support pillar and the industrial-grade linear guide rail of the X-axis provide more stability to the machine, which increases the engraving motion accuracy to 0.01mm. Y-axis utilizes adaptive wheels to provide a more smooth motion. Easy installation in one step to complete the entire assembly.

6. Adjustable Machine Height: The Sculpfun SF-A9 comes with the additional metal support pillars that can adjust the height of the machine to facilitate the engraving of higher objects, meeting a variety of working needs.

7. Multiple Connection Methods: Supports WiFi, USB and BT function. It can be compatible with the Sculpfun mobile phone APP or the computer software like LightBurn and LaserGRBL.

8. Automatic Air Assist: Upgraded large inner diameter air pipe with a better air channel design that can present a more cleaner cutting effect and improve the service life of the laser lens.

Support Power Switching 40W/20W

Upgraded Automatic Air Assist

Sturdy and Easy Installation

Easy installation with all-in-one design, one step to complete the entire process

The X-axis adopts industrial-grade linear guide rail, which can reach a working speed of
up to 36000mm/min

1- Pull down the fixed focus lever

2- Rotate the red knob for quick height positioning

3- Use the knob on the top of the laser is for the precise adjustment

 

Packing List:

 

1 x Laser Machine 1 x Laser Head
1 x Adapter 1 x Power Cable
4 x Metal Support Pillar
4 x Spare Metal Support Pillar
1 x Type-C Data Cable
1 x Air Pump 1 x Goggles
1 x Lens Repair Kit
1 x Tool Set 1 x Screw Kit
1 x Cable Tie Pack
1 x Antenna Pack
1 x Aluminium Plate
2 x Basswood Board 2 x Key

Product DescriptionS30 Ultra 33W 600x600mm Automatic Air Assist Replaceable Len Metal Engraver Wood Jewelry Cutting Laser Engraving MachineSCULPFUN S30 Ultra Main feature1. 600x600mm engraving area: the real engraving area is 600x600mm, which makes many of your works not limited by the area, and you can produce most of the large-scale cutting works. In addition, the 600x600mm area is very sufficient, and the service life is extremely long, and there is almost no need to upgrade the structure in future use.
2. Enhanced 33W three laser options:
S30 Ultra series laser uses a single enhanced 6W diode, which makes its actual laser power and cutting ability higher, and
provides 11W/22W/33W three through combined design laser options.
3. Professional safety design: S30 Ultra series is equipped with emergency stop switch and safety child lock. In an emergency, tapping the emergency stop switch can stop the machine; after pulling out the key, the machine cannot be turned on, which can prevent children from turning it on by mistake.
4. One series One structure, easy to upgrade: S30 Ultra series models keep high compatibility in design, S30 Ultra 11W/22W/33W power adapter, structure, and laser cable are all the same. In future upgrades, 11W- 22W-33W you only need to replace the laser head without any other changes.
5. Tool box, laser repair box, fixed-focus column holder: S30 Ultra provides professional tool storage boxes and maintenance tool boxes, including mechanical wrenches, tweezers, nozzle cleaners, etc., all of which are conveniently stored in boxes. In addition, a professional fixed-focus column storage box is provided on the machine, which is convenient for storing the fixed-focus column.
6. Enhanced 42-bit stepping motor: Enhanced 42-bit stepping motor provides sufficient power to make the machine move at high speed. The torque reaches 4.2 Kg·cm (ordinary machines are 3.1 Kg·cm). In future upgrades, even if the laser or the load becomes heavier, there is no need to replace the motor.
7. Replaceable protective lens: S30 Ultra series laser adopts innovative replaceable lens, which greatly improves the service life of the laser, which is more than 10 times longer than other general lasers. When the lens is damaged or after long-term use, the lens can be replaced to restore its cutting power. One free lens is included in the package with purchase, lenses are very cheap and can be easily purchased from SCULPFUN. 8. Built-in high-pressure air-assisted nozzle: S30 Ultra series is equipped with advanced high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving cutting efficiency, and the cutting speed is more than 5 times faster than that without air assist. The powerful airflow blows away the residue, making the cutting surface very clean. 9. Upgraded 32-bit air-assisted motherboard: the latest 32-bit motherboard supports automatic air-assisted control function, supports wireless Blue tooth connection to control the machine, and is not limited by the distance of the USB cable. 10. Industrial-grade cutting precision: S30 Ultra adopts an extremely strong 0.005mm high-precision linear slide rail X-axis to achieve industrial-grade engraving precision. When comparing small engraving details, the S30 Ultra does not have the wavy patterns that appear on ordinary engraving machines. 11. Detachable laser eye shield: S30 series is equipped with a detachable glass eye shield, which will not be dazzling even if you don't wear glasses. Plus you can easily disassemble it if you don't need it. 12. Solid and durable frame: The S30 series is made of high-strength aluminum alloy, and its frame can withstand a weight of up to 50KG without damage, which is very durable. The frame can be used for a long time and maintain high precision, when the machine needs to be upgraded, only the latest laser needs to be upgraded.Details Images

1. 10W Laser Beam Shaping Technology: Adopting the latest 10W laser beam shaping technology diode laser, the S9 Pro has an ultra-fine 0.06mm laser focus. With super cutting penetration and precision, it can cut up to 15mm thick wood, 10mm acrylic, and directly engrave ceramics and 304 stainless steel.

2. Fast Focusing Design: The S9 Pro laser has the fastest focus design. It combines a fixed focus lens and a sliding design, allowing you to slide the laser and tighten the screws to easily complete the focus. This makes it very easy to use the laser.

3. Solid and Easy-assembly Structure Design: Full-metal structure design enhances the solidity of the machine, significantly improving the accuracy of engraving. The whole structure is designed for easy-assembly, which can be completed in 10-20 minutes. The structural frame is very durable and remains open to upgrade. During use, you can keep the frame and replace it with other new lasers, or replace longer metal beams to expand the engraving area.

4. New Eye Protection Design: 98% of ultraviolet light can be filtered out by the laser filter cover. You and the people around you can watch the laser engraving without wearing goggles. At the same time, it can prevent animals from catching the laser spot.

5. Wide Compatibility: The SCULPFUN S9 Pro is compatible with various mature engraving software, such as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire. It supports PWM mode engraving, Windows system, and MAC system (LightBurn). The engraving file format like JPG, PNG, DXF, SVG, AI, G-code, NC, BMP, etc. are supported.

6. Safe Design: The machine is equipped with a very convenient power switch, which is not available in others. Fixing holes are reserved on the four foot supports and the body structure to facilitate the fixing of the machine and the data cable.

7. A4 Steel Pad: The free A4 size steel pad can protect the table from laser damage and isolate fire hazards.

8. Square Measuring Ruler: X-axis and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects quickly. The 400x410mm large engraving area can meet your various engraving needs.

Product Information:

Product model: SCULPFUN S9 Pro
Engraving size: 400*410mm
Engraving materials: wood, paper, cardboard, PCB board, aluminum oxide,  304 Stainless steel, ceramic，dark stone
Cutting materials:  wood, black acrylic, cardboard, fabric, bamboo
Diode laser power: 10W 
Laser wave length: 450±5nm
Engraving accuracy: 0.01mm
Focusing method: fixed focus laser + sliding device
Laser protective cover: The light filter cover on the laser protects the user's eyes and prevents animals grabing the laser spot.
Operating software: LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, support Windows system, support MAC system. Supported file formats NC, BMP, JPG, PNG, DXF and other image formats.
Data transmission method: USB connection
Power supply: International universal standard power input: 100-240V AC, 50/60HZ output: 12V 5A
Equipment net weight: 3.0kg
Package weight: 4.77kg
Packing size: 625*360*135mm

Packing List:

1× X axis assembly; 2× X shaft; 2× Y shaft; 1× Control box module set; 3× Support feet
1× Laser module set; 1× 12V 5A power adapter; 1× Power cord; 1× USB cable
Step 1~5 Screw installation package; 2× Belt; 1× T-shaped M5 screwdriver; 1× L-shaped M4 screwdriver; 1× L-shaped M3 screwdriver; 10× Tie; 1× 8-10mm nut wrench; 1× Brush
1× Laser goggles; 2× 3mm thickness 10x10cm wood board; 1× A4 size steel desktop protection pad

 

SCULPFUN S9 5.5W Laser Engraving & Cutting Machine
Key Features:

• Powerful 90W laser beam effect

• Fast focusing system with a safe design

• Enhanced eye protection technology

• Easy-to-assemble and robust structure

• Wide compatibility with precise scale axis

SKU: S9SF55w

Categories: SCULPFUN Laser Diode Machines, Laser Best Sellers, SCULPFUN
Tags: 5-6W, Diode Laser Machine, Laser Cutter, SCULPFUN, Sculpfun Laser Machine

SCULPFUN S9 laser engraving machine✅【90W effect laser beam cutter】Our laser engraver uses the latest 5.5W laser beam shaping technology blue diode laser, it has an ultra-fine 0.06mm sharp laser focus, with super cutting penetration and precision, it can cut up to 15mm thick wood, 10mm acrylic, carve ceramics and stainless steel, this is almost beyond the effect of 90W CO2 laser.✅【Fast focusing and safe design】Our powerful laser etching machine have the fastest focus design. It combines a fixed-focus lens and a slider. You only need to slide the laser module and tighten the screws to complete the focusing. Very easy and convenient. Meanwhile, the laser machine is equipped with a power switch, which is not available in others. Fixing holes are reserved on the four feet and the body structure to facilitate fixing the machine and the data cable.✅【New eye protection design】The laser protective cover perfectly protects your eyes and filters UV light for 98%. You and the people around can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles, and prevent pets and children from grabbing the laser spot.✅【Solid and easy installation structure design】 The full-metal structure design makes the machine extremely solid, and it improves the accuracy of engraving. The whole structure is designed for easy assembly, and the assembly can be completed in 10-20 minutes. The structural frame is very durable and remains open to upgrading. During use, you can keep the frame and replace it with other new lasers. Or replace longer metal beams to expand the engraving area.✅【Wide compatibility & Precise scale lines axis】The laser engraving machine can be compatible with LaserGRBL (free, support Windows) or LightBurn (paid, support Windows, Mac OS, and Linux). Engraving file format support: NC, DXF, BMP, JPG, PNG, etc. There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement. 410x420mm large area engraving interval can meet your various engraving needs like DIY jewelry wood printer. It is the best DIY etch tool for the craft.✅【After-sales guarantee】We provide 12-month free maintenance, replacement parts, and technical support services. If you encounter any problems in use, please do not hesitate to contact our seller customer service, our professional after-sales engineer team will solve all problems for you.

 

https://shorturl.at/ebwS2

SCULPFUN S9 laser engraving machine✅【90W effect laser beam cutter】Our laser engraver uses the latest 5.5W laser beam shaping technology blue diode laser, it has an ultra-fine 0.06mm sharp laser focus, with super cutting penetration and precision, it can cut up to 15mm thick wood, 10mm acrylic, carve ceramics and stainless steel, this is almost beyond the effect of 90W CO2 laser.✅【Fast focusing and safe design】Our powerful laser etching machine have the fastest focus design. It combines a fixed-focus lens and a slider. You only need to slide the laser module and tighten the screws to complete the focusing. Very easy and convenient. Meanwhile, the laser machine is equipped with a power switch, which is not available in others. Fixing holes are reserved on the four feet and the body structure to facilitate fixing the machine and the data cable.✅【New eye protection design】The laser protective cover perfectly protects your eyes and filters UV light for 98%. You and the people around can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles, and prevent pets and children from grabbing the laser spot.✅【Solid and easy installation structure design】 The full-metal structure design makes the machine extremely solid, and it improves the accuracy of engraving. The whole structure is designed for easy assembly, and the assembly can be completed in 10-20 minutes. The structural frame is very durable and remains open to upgrading. During use, you can keep the frame and replace it with other new lasers. Or replace longer metal beams to expand the engraving area.✅【Wide compatibility & Precise scale lines axis】The laser engraving machine can be compatible with LaserGRBL (free, support Windows) or LightBurn (paid, support Windows, Mac OS, and Linux). Engraving file format support: NC, DXF, BMP, JPG, PNG, etc. There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement. 410x420mm large area engraving interval can meet your various engraving needs like DIY jewelry wood printer. It is the best DIY etch tool for the craft.✅【After-sales guarantee】We provide 12-month free maintenance, replacement parts, and technical

SCULPFUN S30 PRO MAX 20W Laser Engraver Cutter Automatic Air-assist support Expandable 935x905mm Features:

▶  Upgraded Laser Engraving with Air Assist System: The S30 series is equipped with an Ai assist 32-bit motherboard and a control-type air pump, which can intelligently control the air-assist switch during engraving through the LightBurn software M8 button, this makes the engraving and cutting very clean, and is very suitable for the manufacture of exquisite gifts.
▶  Excellent Engraving Performance: S30 PRO MAX 20W laser pursues the ultimate cutting speed, suitable for professionals, shops or factories ; It can cut 15mm balsa wood and 10cm plywood at one time. And making it reach industrial-grade engraving accuracy with extremely solid and high-precision linear slide rail X-axis, no e wavy pattern in carving small items. 410*400mm large-area engraving range can meet your various engraving needs.
▶  Built-in high pressure air assist nozzle: S30 series is equipped with advanced high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving the cutting efficiency, and the cutting speed is more than 5 times faster than that without air assistance. The powerful airflow blows away the residue, making the cut surface very clean.
▶  Replaceable protective lens: Adopts innovative replaceable lens, greatly improves the service life of the laser, which is more than 10 times longer than other general lasers. When the lens is damaged or after long-term use, the lens can be replaced to restore the cutting power. A free lens is included with the purchase, more lens can be easily purchased from SCULPFUN.
▶  Eye Protection and Safety Design:  Equipped with a detachable eye shield, which will not dazzle even without glasses. If you don’t need it, you can easily disassemble it. The presented A4 size steel pad can well protect the table from laser damage. Isolate fire hazards. There is a very safe and eye-catching power switch on the machine, you can directly and quickly turn off the power in an emergency.
▶  Sturdy and Durable Frame: The S30 series is made of high-strength aluminum alloy, its frame can bear up to 50KG weight without damage, and is very durable. The frame can be used for a long time and maintain high precision, only need to upgrade the latest laser when the machine needs to be upgraded.
▶  Innovative XY Axis Expandable Design: you can purchase a Y-axis expansion kit to expand the engraving area to 935x400mm; purchase an XY-axis expansion kit to upgrade Up to 935x905mm engraving area to better handle large engraving or cutting work. And there are precise scale lines on the X-axis and Y-axis which is convenient for you to quickly measure the size of the engraved object.

Special Price: ₹29,999.00 (Incl. GST) / ₹25,422.88 (Excl. GST)
Original Price: ₹33,999.00

 

Product Overview:

[90W Equivalent Laser Cutting Power]
The MECHBLOCK S9 features advanced 5.5W blue diode laser beam shaping technology, delivering ultra-fine 0.06mm laser focus for exceptional cutting precision and depth. It can:

• Cut up to 15mm thick wood

• Slice through 10mm acrylic

• Engrave ceramics and stainless steel

This performance rivals that of a traditional 90W CO₂ laser, making it a powerful tool for engraving cricket bats and other materials.

✅【90W effect laser beam cutter】Our laser engraver uses the latest 5.5W laser beam shaping technology blue diode laser, it has an ultra-fine 0.06mm sharp laser focus, with super cutting penetration and precision, it can cut up to 15mm thick wood, 10mm acrylic, carve ceramics and stainless steel, this is almost beyond the effect of 90W CO2 laser.✅【Fast focusing and safe design】Our powerful laser etching machine have the fastest focus design. It combines a fixed-focus lens and a slider. You only need to slide the laser module and tighten the screws to complete the focusing. Very easy and convenient. Meanwhile, the laser machine is equipped with a power switch, which is not available in others. Fixing holes are reserved on the four feet and the body structure to facilitate fixing the machine and the data cable.✅【New eye protection design】The laser protective cover perfectly protects your eyes and filters UV light for 98%. You and the people around can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles, and prevent pets and children from grabbing the laser spot.✅【Solid and easy installation structure design】 The full-metal structure design makes the machine extremely solid, and it improves the accuracy of engraving. The whole structure is designed for easy assembly, and the assembly can be completed in 10-20 minutes. The structural frame is very durable and remains open to upgrading. During use, you can keep the frame and replace it with other new lasers. Or replace longer metal beams to expand the engraving area.✅【Wide compatibility & Precise scale lines axis】The laser engraving machine can be compatible with LaserGRBL (free, support Windows) or LightBurn (paid, support Windows, Mac OS, and Linux). Engraving file format support: NC, DXF, BMP, JPG, PNG, etc. There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement. 410x420mm large area engraving interval can meet your various engraving needs like DIY jewelry wood printer. It is the best DIY etch tool for the craft.✅【After-sales guarantee】We provide 12-month free maintenance, replacement parts, and technical support services. If you encounter any problems in use, please do not hesitate to contact our seller customer service, our professional after-sales engineer team will solve all problems for you.

• 600x600mm engraving area : the real engraving area is 600x600mm, which makes many of your works not limited by the area, and you can produce most of the large-scale cutting works. In addition, the 600x600mm area is very sufficient, and the service life is extremely long, and there is almost no need to upgrade the structure in future use.

• Enhanced 11W, 22W, 33W three laser options : S30 Ultra series laser uses a single enhanced 6W diode, which makes its actual laser power and cutting ability higher, and provides 11W/22W/33W three through combined design laser options.

• Professional safety design : S30 Ultra series is equipped with emergency stop switch and safety child lock. In an emergency, tapping the emergency stop switch can stop the machine; after pulling out the key, the machine cannot be turned on, which can prevent children from turning it on by mistake.

• One series One structure, easy to upgrade : S30 Ultra series models keep high compatibility in design, S30 Ultra 11W/22W/33W power adapter, structure, and laser cable are all the same. In future upgrades, 11W- 22W-33W you only need to replace the laser head without any other changes.

• Tool box, laser repair box, fixed-focus column holder : S30 Ultra provides professional tool storage boxes and maintenance tool boxes, including mechanical wrenches, tweezers, nozzle cleaners, etc., all of which are conveniently stored in boxes. In addition, a professional fixed-focus column storage box is provided on the machine, which is convenient for storing the fixed-focus column.

• Enhanced 42-bit stepping motor : Enhanced 42-bit stepping motor provides sufficient power to make the machine move at high speed. The torque reaches 4.2 Kg·cm (ordinary machines are 3.1 Kg·cm). In future upgrades, even if the laser or the load becomes heavier, there is no need to replace the motor.

• Replaceable protective lens : S30 Ultra series laser adopts innovative replaceable lens, which greatly improves the service life of the laser, which is more than 10 times longer than other general lasers. When the lens is damaged or after long-term use, the lens can be replaced to restore its cutting power. One free lens is included in the package with purchase, lenses are very cheap and can be easily purchased from SCULPFUN.

• Built-in high-pressure air-assisted nozzle : S30 Ultra series is equipped with advanced high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving cutting efficiency, and the cutting speed is more than 5 times faster than that without air assist. The powerful airflow blows away the residue, making the cutting surface very clean.

• Upgraded 32-bit air-assisted motherboard : the latest 32-bit motherboard supports automatic air-assisted control function, supports wireless Bluetooth connection to control the machine, and is not limited by the distance of the USB cable.

• Industrial-grade cutting precision : S30 Ultra adopts an extremely strong 0.005mm high-precision linear slide rail X-axis to achieve industrial-grade engraving precision. When comparing small engraving details, the S30 Ultra does not have the wavy patterns that appear on ordinary engraving machines.

• Detachable laser eye shield : S30 series is equipped with a detachable glass eye shield, which will not be dazzling even if you don’t wear glasses. Plus you can easily disassemble it if you don’t need it.

SCULPFUN S30 Pro 10W Automatic Controlled Air Assist Wood Leather Metal, black Acrylic Engraver Printer Cutting Laser Engraving Machine

1. Because of the powerful laser power, it is forbidden to run the engraving machine without being supervised. Pause it if you’re not around.

2. For detailed machine instructions, please refer to the manual for parameter settings.

3. When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles.

4. Do not touch the laser with your hands, otherwise, you may burn your hands.

5. Please avoid a strong impact on the machine.

6. It is forbidden for children under 14 years old to use this product, and children over 14 years old need adult supervision.

7. Do not apply the laser directly to any specular reflection object, which may cause injury to the operator or burn the laser.

Highlights

Automatically Controlled Air Assist System
The S30 series is equipped with an air-assist 32-bit motherboard and a control-type air pump, which can intelligently control the air-assist switch during engraving through the LightBurn software M8 button, this makes the engraving and cutting very clean, and is very suitable for the manufacture of exquisite gifts.

Built-in High-Pressure Air Assist Nozzle
S30 series is equipped with an advanced high-pressure air-assisted metal nozzle, which can generate 30L/min high-pressure airflow under the air pump, greatly improving the cutting efficiency, and the cutting speed is more than 5 times faster than that without air assist.

Ultra-thin 10W Laser
Adopting ultra-thin laser shaping technology, the laser focus of S30 is as thin as hairs and very powerful for engraving or cutting. The S30 Pro 10W laser is suitable for frequent cutting, doing everything faster.

Replaceable Protective Lens
S30 series laser adopts an innovative replaceable lens, which greatly improves the service life of the laser, which is more than 10 times longer than other general lasers. When the lens is damaged or after long-term use, the lens can be replaced to restore the cutting power.

Expandable Engraving Area
The original engraving area is about 410x400mm, while it features XY-axis expandable design, so you can purchase a Y-axis expansion kit to expand the engraving area to 935x400mm; purchase an XY-axis expansion kit to upgrade up to 935x905mm engraving area, which can help you better handle large area engraving or cutting work.

Upgraded 32-bit Air-assist Motherboard
The latest 32-bit motherboard supports automatic air-assist control and reserves Bluetooth, and SD card offline printing function. (Upgrade Kit sold separately)

Industrial-grade Cutting Accuracy
Extremely solid and high-precision 0.005mm linear slide rail X-axis make it reach industrial-grade engraving accuracy. When comparing small engraving details, the S30 series does not have the wavy pattern that appears in ordinary engraving machines.

Sturdy and Durable Aluminum Alloy Frame
Made of high-strength aluminum alloy, its frame can bear up to 50KG weight without damage, and is very durable. The frame can be used for a long time and maintain high precision, only need to upgrade the latest laser when the machine needs to be upgraded.

Safety Design
The presented A4 size steel pad can well protect the table from laser damage. There is an eye-catching power switch on the machine, you can directly and quickly turn off the power in an emergency.

Right-angle Measuring Ruler
There are precise scale lines on the X-axis and Y-axis to form a right-angle measuring ruler, which is convenient for you to quickly measure the size of the engraved object.

Features :

• 600x600mm engraving area : the real engraving area is 600x600mm, which makes many of your works not limited by the area, and you can produce most of the large-scale cutting works. In addition, the 600x600mm area is very sufficient, and the service life is extremely long, and there is almost no need to upgrade the structure in future use.

• Enhanced 11W, 22W, 33W three laser options : S30 Ultra series laser uses a single enhanced 6W diode, which makes its actual laser power and cutting ability higher, and provides 11W/22W/33W three through combined design laser options.

• Professional safety design : S30 Ultra series is equipped with emergency stop switch and safety child lock. In an emergency, tapping the emergency stop switch can stop the machine; after pulling out the key, the machine cannot be turned on, which can prevent children from turning it on by mistake.

• One series One structure, easy to upgrade : S30 Ultra series models keep high compatibility in design, S30 Ultra 11W/22W/33W power adapter, structure, and laser cable are all the same. In future upgrades, 11W- 22W-33W you only need to replace the laser head without any other changes.

• Tool box, laser repair box, fixed-focus column holder : S30 Ultra provides professional tool storage boxes and maintenance tool boxes, including mechanical wrenches, tweezers, nozzle cleaners, etc., all of which are conveniently stored in boxes. In addition, a professional fixed-focus column storage box is provided on the machine, which is convenient for storing the fixed-focus column.

• Enhanced 42-bit stepping motor : Enhanced 42-bit stepping motor provides sufficient power to make the machine move at high speed. The torque reaches 4.2 Kgcm (ordinary machines are 3.1 Kgcm ). In future upgrades, even if the laser or the load becomes heavier, there is no need to replace the motor.

• Replaceable protective lens : S30 Ultra series laser adopts innovative replaceable lens, which greatly improves the service life of the laser, which is more than 10 times longer than other general lasers. When the lens is damaged or after long-term use, the lens can be replaced to restore its cutting power. One free lens is included in the package with purchase, lenses are very cheap and can be easily purchased from SCULPFUN.

• Built-in high-pressure air-assisted nozzle : S30 Ultra series is equipped with advanced high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving cutting efficiency, and the cutting speed is more than 5 times faster than that without air assist. The powerful airflow blows away the residue, making the cutting surface very clean.

• Upgraded 32-bit air-assisted motherboard : the latest 32-bit motherboard supports automatic air-assisted control function, supports wireless Bluetooth connection to control the machine, and is not limited by the distance of the USB cable.

• Industrial-grade cutting precision : S30 Ultra adopts an extremely strong 0.005mm high-precision linear slide rail X-axis to achieve industrial-grade engraving precision. When comparing small engraving details, the S30 Ultra does not have the wavy patterns that appear on ordinary engraving machines.

• Detachable laser eye shield : S30 series is equipped with a detachable glass eye shield, which will not be dazzling even if you don’t wear glasses. Plus you can easily disassemble it if you don’t need it.

Main Features:

 

1. 10W Powerful Cutting Laser: The iCube Pro Max uses 10W diode laser with 0.08mm laser focus. It has stronger laser performance, cutting penetration and higher working efficiency, which can engrave or cut more difficult materials and complete the laser tasks faster.

2. High-Speed Engraving: iCube Pro Max 10W laser engraver with the 32-bit motherboard greatly improves the engraving efficiency, which can reach 10000mm/min engraving speed.

3. With Smoke Filter: Sculpfun iCube laser engraver is equipped with the smoke filtration system that effectively filters the smoke generated during the engraving and cutting process without the enclosure, which makes it more convenient to engrave and cut in an office or home. Bringing more usage scenarios and enjoying the fun of engraving without limitation.

4. Multiple Connection Methods: The laser engraving machine supports mobile phone and computer system connection. You can connect to iCube machine via your mobile phone with Sculpfun APP, or you can connect to the computer with Type-C interface data cable to use. It is compatible with Win7/Win8/Win10/Win11/MAC/IOS/Android/Linux system.

5. Temperature Alarm Function: Built with the temperature alarm device, the machine will stop running and emit a buzzer alarm when the temperature inside the engraving machine is over 45℃ to ensure the safety of users and equipment. And when the temperature descends, restart the machine to start the work.

6. Enclosed Eye Protection Shield: iCube portable laser engraver is designed with a detachable fully enclosed Acrylic material eye protection shield, which can effectively protect your eyes from different angles. It enables you to observe the laser engraving process without wearing the goggles.

7. Engraving Objects without Size Limit: With the unique semi-open structure design, there is no limitation by the size of the engraving objects. You can place them inside the machine or put the machine on the surface of some large objects to perform the tasks. The patterns engraving area is 120x120mm which can meet your various engraving demands.

8. Replaceable Laser Lens: Sculpfun iCube series adopts an innovative laser head that supports to replace the laser lens, which greatly improves the service life of the laser by more than 10 times longer than that of other general lasers. When the lens is damaged or dirtied after long-term use, it can be replaced to restore the cutting power.

Packing List:

1 x Laser Engraver; 1 x U-Shaped Shield; 1 x Metal Plate; 1 x Laser Head; 1 x Power Adapter; 

1 x Power Cable; 1 x Type-C Data Cable; 1 x Cotton Filter Set; 1 x Lens Repair Kit; 1 x Goggle; 1 x Basswood Board; 1 x MDF; 1 x Installation Instruction

SCULPFUN V5 UV Laser Marking Machine

Precision. Versatility. No Burn.

The SCULPFUN V5 UV Laser Marking Machine sets a new standard in precision engraving with cutting-edge cold laser technology. Engineered for professionals who demand ultra-fine detail and zero thermal damage, the V5 delivers exceptional performance on a wide variety of materials.

Key FeaturesCold UV Laser – Zero Burn Technology

Using a 355nm ultraviolet laser, the V5 marks materials without generating heat, preventing scorching, melting, or discoloration. This makes it ideal for sensitive surfaces like plastic, glass, fabric, and coated metals.

Incredible Precision – 0.0019mm Spot Size

With an ultra-fine laser spot size of just 0.0019mm, the V5 offers unmatched detail—up to 16K resolution. It’s perfect for micro-text, high-definition logos, and intricate designs where clarity is critical.

Dual Field Lens System

Includes two easily swappable field lenses:

• 70 × 70 mm: For high-precision tasks such as subsurface engraving in crystal.

• 150 × 150 mm: For larger surface marking with consistent sharpness.

Fast and Accurate

Achieve working speeds up to 10,000 mm/s with a repeated positioning accuracy of 0.001 mm. Combined with electric focusing, this ensures speed and precision on every pass.

Compatible with Over 1500 Materials

The V5 engraves effortlessly on a wide range of surfaces including:

• Metals: Stainless steel, aluminum, titanium, brass, gold, silver, etc.

• Non-metals: Wood, leather, fabric, plastic, acrylic, ceramic, glass, crystal, and more.

Powerful and Adaptive Software

Includes a 4-in-1 engraving software that supports:

• Subsurface engraving

• 3D relief engraving

• Curved surface engraving

• Flat surface processing
  Also compatible with industry-standard software for seamless integration into your workflow.

Expandable & Accessory-Friendly

Compatible with rotary tools for engraving curved and cylindrical items, as well as a slider extension that increases the working area up to 150 × 350 mm. Whether you’re working on a small ring or a large panel, the V5 adapts to your needs.

Technical Specifications What’s in the Box

• UV Laser Unit

• 70×70 mm Field Lens

• 150×150 mm Field Lens (pre-installed)

• Safety Goggles

• Base Assembly & Lifting Column

• Calibration Paper & Focusing Sheet

• Tool Kit & Positioning Bar

• Rotary Module Adapter Cable

• Power and Data Cables

• Extension Cable

• Basswood Board

• Crystal Pillar

• Dog Tag Sample

• Ruler, Level (shipped separately)

• U Disk with Software

• User Manual

• Security Key

Description

Unleash your creativity with the SCULPFUN A9 Ultra Dual Laser—a precision tool designed to elevate any maker’s workshop. Whether you’re crafting metal jewelry, personalized wooden plaques, or acrylic signs, its dual-laser architecture gives you the flexibility and power to take on hundreds of materials and project types with accuracy and speed.

1. Dual Laser Modules (20W Fiber + 40W Diode)

• Swap effortlessly between a 20W fiber laser and 40W diode laser, depending on your craft’s needs. The fiber laser excels at crisp and deep engraving on metals (stainless steel, brass, aluminum, etc.), while the diode module delivers power for cutting through thick woods, acrylic, and other non-metal materials.

• Dual-mode gives you an expanded range without needing multiple machines.

2. Broad Material Versatility
Work confidently with over 350 material types — everything from metals (engraving, rust removal, tile work) to woods, leather, acrylics, glass, stone, and more. Your projects are only limited by imagination.

3. Deep Engraving & Rust Removal
With fiber laser precision, enjoy truly deep engraving with a three-dimensional appearance, clean markings, and even rust oxidation removal on old metal surfaces. Ideal for antiquing metal or restoring surfaces.

4. Massive Working Area
A spacious 400 × 400 mm workbed gives you room for large pieces or multiple smaller components in one go. Expect fewer repositionings, cleaner alignment, and higher throughput.

5. Speed & Precision

• X-axis industrial-grade linear guide rails minimize vibration and deliver high speeds up to 36,000 mm/min.

• Spot sizes are finely adjustable (e.g. 0.05 mm in fiber mode), delivering finer detail and crisper engraving. Great for fine line work, photo engraving, or tiny font sizes.

6. Cutting Power with Diode
The 40W diode laser module enables you to cut thick materials — like ~30 mm wood or black acrylic in one pass — while also engraving at lower power settings for non-metal materials.

7. Safety Features & Build Quality

• Class‑4 laser (standard for high‑power lasers), with safety glasses included.

• Tilt sensor: automatic shutoff if machine tilts more than about 15°.

• Limit switches prevent over‑travel of laser head.

• Air assist built in, with large inner diameter hose and adequate airflow, helping with cleaner cuts and extending lens life.

8. Compatibility & Usability
Works with popular software (LightBurn, LaserGRBL etc.), multiple connection options (USB, Bluetooth, WiFi), and works across platforms (Windows, macOS, iOS, Android). Manual focus design gives control, while the metal frame and adjustable feet add stability.

Use‑Case Scenarios for Crafters

• Metal Jewelry & Awards: Use the fiber laser mode to engrave names, logos, or intricate designs on stainless steel/fine metals.

• Customized Gifts: Engrave wooden photo panels, leather items, marble coasters, or tiles.

• Signage & Decor: Cut thick wood or acrylic for signs; carve decorative panels or lamp fixtures.

• Prototyping & Small Batch Production: Large bed + high speed = faster throughput.

What kind of laser machine is the A9 Ultra?

The A9 Ultra is a dual-laser machine, featuring a 40W blue diode laser and a 20W fiber laser. It can engrave almost all common materials used in daily life.

• Diode laser: Works best on wood, acrylic, leather, slate, glass, and ceramics.
• Fiber laser: Can engrave clearly on metals like stainless steel, aluminum, gold, silver, iron, and some plastics.

 

DescriptionSCULPFUN IR20 20W Fiber Laser Module Kit

Upgrade your engraving/marking capabilities with the SCULPFUN IR20 20W Fiber Laser Module — a high‑precision, high‑performance add‑on that transforms your SCULPFUN machine into a powerful metal engraving powerhouse.

Key Features & Benefits

• 20W Fiber Laser, 1064 nm Infrared Wavelength
  Delivers strong, precise engraving on metals and dark plastics. The infrared fiber architecture ensures high energy efficiency and minimal power loss during transmission.

• Ultra‑Fine Spot Size (~0.05 mm)
  Enables extremely detailed engraving, sharp edges, and clean lines — perfect for fine artwork, logos, nameplates, or detailed metal work.

• Broad Material Compatibility
  Works well on metals (stainless steel, aluminum, brass, copper, zinc, etc.), dark acrylics or plastics, and can even be used for rust removal on metal surfaces. Ideal for personalized gifts, industrial tagging, branding, and decor.

• High Adaptability & Compatibility
  The IR20 is compatible with most SCULPFUN models (such as SF‑A9, S6, S9, S30 / S30 Ultra, S10, S70 Max, S40 Max), thanks to its included 2‑meter fiber cable and various mounting backplates.

• Real‑Time Power & Frequency Controls with Visual Feedback
  Adjustable power and frequency via knobs + digital display, letting you dial in the perfect settings for depth vs speed in metal engraving.

• Safety Features
  Equipped with an emergency stop switch, rocker switch, proper fuse protection, and required safety gear (glasses). Because fiber lasers are class IV, safe usage is critical.

 

What You Can Do with It

• Engrave deep, high‑contrast markings on metal (stainless steel, aluminum, brass, etc.) for industrial or decorative use.

• Remove surface rust or coatings on metal to restore appearance or prepare for further finishing.

• Mark acrylic, plastics, tiles, etc., when you need clean, permanent engravings.

• Combine with your existing SCULPFUN machine to switch between diode laser (for cutting/engraving wood, acrylic, etc.) and fiber laser (for metal work) if your setup supports dual modules (like the A9 Ultra dual‑laser configuration).

Considerations / Best Practices

• Class IV Laser Safety: Always use protective goggles, ensure no bystanders (especially eyes exposed), proper ventilation, and follow laser safety guidelines. Device emits invisible IR light.

• Cabling Flexibility: The fiber cable is delicate. Avoid sharp bends; minimum bend radius should be obeyed (often ~15 cm). Avoid crushing or twisting it.

• Heat Management / Mounting: Proper mounting and heat dissipation for the module are important. Ensure your machine gantry/frame can support the module and is rigid / well‑aligned to preserve engraving quality.

• Matching Power Supply & Controller: The IR20 kit includes its own PSU. Ensure compatibility with your machine’s interface and mounting setup.

Why It’s a Great Choice for Crafters & Professionals

The SCULPFUN IR20 20W Fiber Laser Module gives you metal‑grade finishing in a relatively compact package. If your projects involve metals (tags, jewelry, signage, metal business cards, industrial parts), this module lets you handle those with clarity, depth, and durability not possible (or requiring much longer time) with only diodes. At the same time, because it’s modular and attaches to existing SCULPFUN machines, you don’t need a totally separate laser setup — saving cost and space, while expanding your capabilities.

SCULPFUN S30 Pro 10w Laser Module for Laser Engraver

₹39,999.00 Incl.GST / ₹33,897.46 Excl.GST

• SCULPFUN S30 Pro 10w Laser Module Diode Interchangeable Lens Laser Module Wood Laser Engraving Cutting Machine Module Laser Head
• Built-in high-pressure air-assisted nozzle
• Replaceable protective lens
• Highly compatible design
• Ultra-fine and high-density 10W laser shaping technology
• Faster, stronger and cleaner
• Detachable laser eye shield
• Universal 12V/PWM modulation board

 

Main feature:

1. Built-in high-pressure air-assisted nozzle

2.Replaceable protective lens3. Highly compatible design4. Ultra-fine and high-density 10W laser shaping technology5. Faster, stronger and cleaner6. Detachable laser eye shield7. Universal 12V/PWM modulation boardApplicable machines:laser engraving machines such as SCULPFUN S9/S6pro/S6 or DIY 3D printers, CNC machine tools.How to judge whether the S30 Pro laser is suitable for use? You need to pay attention that the input voltage of the S30 Pro laser is 12V, and the S30 Pro is a 3pin interfaceEngraving/cutting materials: Engraving material: all kinds of wood (including walnut, cherry and other high-density wood), MDF, zigzag, cardboard, plastic, leather, PCB board, aluminum oxide, 304 stainless steel, ceramic, dark stoneCutting material: all kinds of wood (including walnut, cherry and other high-density wood), MDF, acrylic board, cardboard, non-woven, bamboo, leather, some plastic boards, PCB boardsS30 Pro laser module packing list:
7.5mm inner diameter air tube acrylic protective coverS30 Pro Laser head*1Multi-function connector*150mm measuring column*1Screw and tool kit*1

Note:

●Because of the powerful laser of S30 Pro, it is forbidden to run the engraving machine unattended. Pause it if you’re not around.

●For detailed machine instructions, please refer to the manual for parameter settings.

●When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles.

●Do not touch the laser with your hands, otherwise you may burn your hands.

●Please avoid strong impact on the machine.

●It is forbidden for children under 14 years old to use this product, and children over 14 years old need adult attended.

Replacement Laser Module 5.5w for SCULPFUN S9

₹12,999.00 Incl.GST / ₹11,016.10 Excl.GST

• SCULPFUN S9 laser module 90W effect laser head, used for laser engraver laser engraving machine laser cutter wood acrylic cutting tools
• Widely compatible design
• 90W effect laser beam shaping technology
• Fast fixed focus design
• Circle eye protection cover design
• General 12V/PWM modulation board

SKU: S9LMCategories: SCULPFUN Laser Diode Modules, SCULPFUN


SCULPFUN S9  laser module , used for laser engraver laser engraving machine laser cutter wood acrylic cutting toolsMain Feature:

Widely compatible design: The SCULPFUN laser module has a clever and widely compatible structural connection device, which can be well adapted to different laser engraving machines, laser cutting machines, 3D printers, CNC milling machines, etc. It can be installed on a variety of brand machines, such as SCULPFUN, ATOMSTACK, ORTUR laser engraving machine, or other DIY type machines.

90W effect laser beam shaping technology: S9 uses the latest 5.5W laser beam shaping technology ,the effect of this technique is to get a super-high-density energy laser beam , it is more than just a thinner focus, the entire beam is very thin. It has an ultra-fine 0.06mm sharp laser focus, with super cutting penetration and precision, he can cut up to 15mm thick wood, 10mm acrylic, carve ceramics and stainless steel

Fast fixed focus design: The S9 laser module has the fastest focusing design on the market. It combines a fixed focus lens and a sliding design. You only need to slide the laser and tighten the screws to complete focusing. This makes the use of the laser very simple. Using it on different machines does not affect its sliding fixed focusing function.

Circle eye protection cover design: The laser filter cover filters 98% of the ultraviolet light to the eyes. You and the people around you can watch laser engraving from all angles without wearing goggles. At the same time, it can prevent animals from catching the laser spot.

₹39,999.00 Incl.GST / ₹33,897.46 Excl.GST

SCULPFUN S30 5W
• Necessary accessories for laser cutting
• Cutting through observable design
• Safe metal desktop protection board
• Square measuring ruler
• Wide compatibility
• All-metal high flatness

Features:

 1. Necessary accessories for laser cutting:

After using this laser cutting honeycomb table to cut wood, black acrylic and other materials, the edges of the wood are neat and clean, not easy to be yellowed by smoke, and you can get a clean cutting work.2. Cutting through observable design:SCULPFUN honeycomb table contains a very convenient cutting and observation design. When the laser cuts through wood or black acrylic, the metal plate at the bottom of the honeycomb will emit a bright light, which means that the cutting has penetrated. Solve the problem that ordinary engraving machine is difficult to judge whether cutting through.You don’t need to calculate the number of cuts , just keep repeating cutting until the bottom glows, which means the material has been cut through.3. Safe metal desktop protection board:SCULPFUN honeycomb Board is equipped with a metal desktop protection board, which can protect the table from laser damage, which is very suitable for many different diode laser engravers.4. Square measuring ruler:X-axis and Y-axis contain precise scale lines to form a right-angle measuring ruler, which is convenient for you to measure the size of cutting objects quickly.5.  Wide compatibility:The machine can be compatible with various mature laser engraving machines, such as diode DIY laser engraving machine and CO2 laser engraving machine.6. All-metal high flatness:SCULPFUN is all made of metal, processed by high-precision CNC, solid structure not easy to deform, and high flatness.

Essential details

Price: ₹39,999.00 (Incl. GST) / ₹33,897.46 (Excl. GST)

Key Features:

• Complete set of essential accessories for laser cutting

• Transparent design for easy observation during cutting

• Durable metal desktop protection board for enhanced safety

• Precision square measuring ruler included

• Compatible with a wide range of materials

• High-precision, all-metal construction

Model: SCULPFUN S30 5W
SKU: S305W

Categories: SCULPFUN Laser Diode Machines, SCULPFUN
Tags: 5–6W, Diode Laser Machine, Laser Machine, SCULPFUN, Sculpfun Laser Machine

 

SCULPFUN S9 Laser Module 5.5w for Laser Engraver 90W Effect

₹12,999.00 Incl.GST / ₹11,016.10 Excl.GST

SCULPFUN S9 laser module 90W effect laser head, used for laser engraver laser engraving machine laser cutter wood acrylic cutting tools （90W CO2 laser effct）
Widely compatible design
90W effect laser beam shaping technology
Fast fixed focus design
Circle eye protection cover design
General 12V/PWM modulation board

Main Features:

1. 830*800 Extra Large Working Area

Featuring a frame placement area size measuring 980mm×1000mm, the Sculpfun S70 Max is perfect for accommodating super large materials. Its extra large working area of 830*800mm enables the processing of larger objects, catering to diverse needs. In addition, the maximum marking speed can reach up to 36000mm/min, which makes it easy to process large area cutting and batch engraving, ideal for studios, enthusiasts as well as professionals.

2. 70W Ultra Powerful Laser

The S70 Max is a professional laser engraving machine which utilizes twelve 6W semiconductor laser chips with a maximum chip laser power of up to 72W, empowering the machine with higher performance and delivering the exceptional efficiency. Full 100% power with the standard 50L high flow air pump, it can cut up to 20mm plywood, 30mm paulownia wood, 10mm black acrylic.

3. Strong Cutting Effect

Sculpfun S70 Max adopts the latest fiber optic spot compression technology, with an ultra-fine spot size of 0.15*0.12mm. It supports Z-axis offset in LightBurn software and supports cutting move down for each cut, ensuring a flat cutting surface and significantly reducing burn marks on the cut surface.

4. Auto-Focus Function

This S70 Max laser cutter is designed with an auto-focus button, allowing the machine to automatically complete the focusing process with a press of the auto-focus button, ensuring quick project initiation. Combined with the cross positioning system, it greatly enhances the efficiency of focusing. The laser comes with a dirty lens detection, prompting the user to replace the lens in a timely manner to maintain the machine performance.

5. Stable Structure

It is equipped with four support feet and fixed holes, using the new type of three-axis three-roller structure. This design enables high-speed and smooth operation as well as low noise during working, making it suitable for heavy-duty engraving and cutting tasks.

6. Offline Work

S70 Max 70W laser engraver comes with a TS1 touch screen, which can realize offline work without a computer by importing the files in advance. Moreover, it can also be connected to the Sculpfun APP via TS1's Wi-Fi, and the slicing work can be completed with a cell phone.

7. Safety Features

Featured with multiple sensors including tilt detection, flame detection, emergency stop switch, safety lock, along with the OD4+ goggles as standard, this versatility ensures the safety of users.

8. Multiple Accessories Compatibility

A wide range of laser engraving machine accessories are offered for the S70 Max. By selecting the optional ones like the 800*800mm large honeycomb working panel, B70 large enclosure and SP1 smoke purifier to provide you with a more comfortable working environment.

20W Powerful Laser: SCULPFUN SF-A9 laser engraving machine features a strong 20W output laser module, excellent for both cutting and engraving, which can cut 20mm fortune paulownia wood and 5mm MDF at one pass time. It uses the heat pipe radiator to provide a faster and more balanced heat dissipation performance.

Safety Protection Design: Built with a tilt sensor, it will set off an alarm and stop emitting laser light while the machine body is off-balance and tilts over 15°. It is also equipped with the functions of emergency stop and child safety lock switches, flame temperature sensor. When it detects the flames during the working process, the flame temperature sensor will be triggered and the machine will stop working with an alarm while automatically moves to the safest location.

High Speed Up to 36000mm/min: The SF-A9 laser engraver supports the high speed engraving mode with a faster working speed of up to 36000mm/min as well as a stable machine body to bring a perfect engraving effect. And it supports precision mode to cut more accurately for a better components assembly.

Precise Focusing Design: Designed with a most precise focusing, the focus lever on the laser head is stable that enables the focusing position more accurate. The red knob on the right side of the laser is to raise or lower the laser module for the quick height positioning according to the material’s thickness, and the rotary knob on the top of the laser is for the precise adjustment.

Sturdy and Easy Installation: Full metal structure design makes the machine robust. The levelling structure of the metal support pillar and the industrial-grade linear guide rail of the X-axis provide more stability to the machine, which increases the engraving motion accuracy to 0.01mm. Y-axis utilizes adaptive wheels to provide a more smooth motion. Easy installation in one step to complete the entire assembly.

Adjustable Machine Height: The Sculpfun SF-A9 comes with the additional metal support pillars that can adjust the height of the machine to facilitate the engraving of higher objects, meeting a variety of working needs.

Multiple Connection Methods: Supports WiFi, USB and BT function. It can be compatible with the Sculpfun mobile phone APP or the computer software like LightBurn and LaserGRBL.

Automatic Air Assist: Upgraded large inner diameter air pipe with a better air channel design that can present a more cleaner cutting effect and improve the service life of the laser lens.

Easy installation with all-in-one design, one step to complete the entire process

The X-axis adopts industrial-grade linear guide rail, which can reach a working speed of
up to 36000mm/min

1- Pull down the fixed focus lever

2- Rotate the red knob for quick height positioning

3- Use the knob on the top of the laser is for the precise adjustment

 

Packing List:

1 x Laser Machine 1 x Laser Head
1 x Adapter 1 x Power Cable
4 x Metal Support Pillar
4 x Spare Metal Support Pillar
1 x Type-C Data Cable
1 x Air Pump 1 x Goggles
1 x Lens Repair Kit
1 x Tool Set 1 x Screw Kit
1 x Cable Tie Pack
1 x Antenna Pack
1 x Aluminium Plate
2 x Basswood Board 2 x Key

The Sculpfun S30 5W is a diode laser engraving and cutting machine designed for various DIY projects, crafts, and professional engraving applications. It is known for its high-quality construction and advanced features, which make it suitable for use in a wide range of materials such as wood, acrylic, leather, and some metals. Here's an overview of the main features and functions of the Sculpfun S30 5W:

1. Dual Laser Modules (20W Fiber + 40W Diode)

• Swap effortlessly between a 20W fiber laser and 40W diode laser, depending on your craft’s needs. The fiber laser excels at crisp and deep engraving on metals (stainless steel, brass, aluminum, etc.), while the diode module delivers power for cutting through thick woods, acrylic, and other non-metal materials.

• Dual-mode gives you an expanded range without needing multiple machines.

2. Broad Material Versatility
Work confidently with over 350 material types — everything from metals (engraving, rust removal, tile work) to woods, leather, acrylics, glass, stone, and more. Your projects are only limited by imagination.

3. Deep Engraving & Rust Removal
With fiber laser precision, enjoy truly deep engraving with a three-dimensional appearance, clean markings, and even rust oxidation removal on old metal surfaces. Ideal for antiquing metal or restoring surfaces.

4. Massive Working Area
A spacious 400 × 400 mm workbed gives you room for large pieces or multiple smaller components in one go. 

5. Speed & Precision

• X-axis industrial-grade linear guide rails minimize vibration and deliver high speeds up to 36,000 mm/min.

• Spot sizes are finely adjustable (e.g. 0.05 mm in fiber mode), delivering finer detail and crisper engraving. Great for fine line work, photo engraving, or tiny font sizes.

6. Cutting Power with Diode
The 40W diode laser module enables you to cut thick materials — like ~30 mm wood or black acrylic in one pass — while also engraving at lower power settings for non-metal materials.

7. Safety Features & Build Quality

• Class‑4 laser (standard for high‑power lasers), with safety glasses included.

• Tilt sensor: automatic shutoff if machine tilts more than about 15°.

• Limit switches prevent over‑travel of laser head.

• Air assist built in, with large inner diameter hose and adequate airflow, helping with cleaner cuts and extending lens life.

8. Compatibility & Usability
Works with popular software (LightBurn, LaserGRBL etc.), multiple connection options (USB, Bluetooth, WiFi), and works across platforms (Windows, macOS, iOS, Android). Manual focus design gives control, while the metal frame and adjustable feet add stability.

FAQ–What kind of laser machine is the A9 Ultra?

The A9 Ultra is a dual-laser machine, featuring a 40W blue diode laser and a 20W fiber laser. It can engrave almost all common materials used in daily life.

• Diode laser: Works best on wood, acrylic, leather, slate, glass, and ceramics.
• Fiber laser: Can engrave clearly on metals like stainless steel, aluminum, gold, silver, iron, and some plastics.

How does the A9 Ultra perform on metal? Can it cut metal?

The A9 Ultra can engrave metals deeply and clearly. With its 20W fiber laser, it can also cut thin metal sheets, such as:

• 0.3–0.4 mm stainless steel
• 0.4 mm brass
• 0.2 mm aluminum

What materials can the A9 Ultra handle?

Engraving:

• Diode laser (40W): Wood, paper, fabric, leather, cardboard, bamboo, MDF, rock, ceramic, jade, marble, cement, brick, painted metal, plated metal, felt, some dark opaque acrylic, coated metal, dark glass, cork, stainless steel. Ideal for general crafting, DIY projects, and decorative applications.
• Fiber laser (20W): Gold, silver, titanium, black acrylic, plastic, aluminum, iron, brass, platinum, stainless steel. It works well on almost all metals and many plastics like plexiglass. Perfect for jewelry, accessories, and detailed metal or plastic work.